Enterprise Database Catalog - Feb 2016
Category Name Description
Address parcelad Provides parcel specific addressing for ArcView Geocoding applications.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Point_Addressing The data set is a point layer representing the location of addressed stsructures in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
zipcodes Some zip code boundaries were altered by the US Postal Service in June of 2001. This layer attempts to replicate the zip codes that are in use at a parcel specific level
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
BaseMap Geodetic Second-Order Horizontal Control Network Provides locations of Second-Order horizontal control points in and around Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Third-Order Horizontal Control Network Provides locations of Third-Order PLSS ties in and around Leon County
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
ADR 1996 1st Order Geodetic Control Points Provides locations of 1st Order Geodetic Control Points as of August 1996 used in the 1996 ADR Landbase Update Project.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
NGS Horizontal Geodetic Control Points in Leon County and Surrounding Areas Provides locations of NGS Horizontal control points in and around Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
NGS Horizontal/Vertical Geodetic Control Points in Leon County and Surrounding Areas Provides locations of NGS Horizontal/Vertical control points in and around Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
NGS Vertical Control Points in Leon County and Surrounding Areas Provides locations of NGS Vertical points in and around Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
BaseMap Planimetric bldgs This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: Tallahassee - Leon County GIS at: (850) 606-5587
Bridge Provides locations of bridges in Leon County
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
combined_dams Provides locations of dams and water impoundment structures in Leon County
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5587
1996 Dams Provides locations of dams and water impoundment structures in Leon County as of January 1996
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Hydro This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
hydro_ln This data represents the outlines of all hydrography polyline features visible in stereo aerial photography. This data is a result of a change detection process designed to update the TLCGIS landbase data layers. The hydro data was originally compiled countywide in 1996 from analog panchromatic stereo aerial photography. The base scale of the photography was 1:7960. This data was updated using a change detection process in 2001. Again, the source photography was 1:7960 scale panchromatic analog stereo photogrphy. In 2005 an update was performed for 164 square miles of northeastern Leon County in February, 2005. The aerial imagery was acquired with the Merrick Digital Airborne Camera System (DACS). The ground sample distance (GSD) of the imagery is 1-foot. An update was performed on 161 square miles of southern Leon County in February, 2006. Another update was performed on 182 square miles of northwestern Leon County in February, 2007. The latest update was performed on 170 sqare miles of Leon County in February, 2008.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Imperv This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
ImpervHydro This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
rdedge This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: Tallahassee - Leon County GIS at: 850.606.5587
BaseMap Reference FDEM_Tiles The grid represents a 200 row by 540 column series of 5000 by 5000 foot cells that provides a standard means of organizing data collected for orthophotography, LiDAR or other mapping projects. The grid covers the entire panhandle of Florida, across the northern peninsula and south to to include all of Levy and Marion Counties. It also extends into the Gulf of Mexico and the Atlantic Ocean to support bathymetric mapping. The grid cells are aligned on even multiples of 5000 foot State Plane North Northings and Eastings for ease of use. There is a unique identifier for each cell that starts with 1 in the northwest corner and ends with 108,000 in the southeast corner. The identifiers increase incrementally west to east within each row. The identifier of the western most cell of each row represents the next sequential integer value after the eastern most identifier of the previous row.
For more information please contact: at:
Maptiles Tile grid used for organizing deliverables from landbase updates
For more information please contact: Tallahassee - Leon County GIS at: 850.606.5587
Orthotiles Dataset comprised of 2500 ft x 2500 ft polygons representing orthoimage tiles
For more information please contact: at:
Basemap Topo NAVD88 ctour88 This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: TLCGIS at: (850) 606-5587
spot88 This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2012 through February 6, 2012.
For more information please contact: TLCGIS at: (850) 606-5587
Boundary Apalachicola Forest Provides approximate boundaries of Apalachicola National Forest
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
citylim Delimits the corporate limits of the City of Tallahassee.
For more information please contact: Tallahassee-Leon County GIS at: (850)891-8379
citylim_ln Delimits the corporate limits of the City of Tallahassee.
For more information please contact: Tallahassee-Leon County GIS at: (850)891-8379
Citylim_ln_Full
For more information please contact: at:
citylim_poly Delimits the corporate limits of the City of Tallahassee.
For more information please contact: Tallahassee-Leon County GIS at: (850)891-8379
City_AnnexHistory Individual City of Tallahassee annexations from 1824 - 1994
For more information please contact: City of Tallahassee Planning Department at: 850-891-6400
cntybnd Delimits the area of Leon County, Florida
For more information please contact: Tallahassee-Leon County GIS at: 850-488-2818
cntybnd_ln Delimits the area of Leon County, Florida
For more information please contact: Tallahassee-Leon County GIS at: 850-488-2818
mj_lakes Provides locations of major lakes in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
schland Provides RegionPoly processing on Parcel coverage at \\edb\edb\property
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5500
Census 2000 2000 Census Geography (Block Group) Provides digital maps of the 2000 census blocks, block groups, tracts and census traffic analysis zones
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
2000 Census Geography (Block) Provides digital maps of the 2000 census blocks, block groups, tracts and census traffic analysis zones
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
2000 Census Geography (Tract) Provides digital maps of the 2000 census blocks, block groups, tracts and census traffic analysis zones
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Census 2010 Demography Blockgroups H1 Housing Units BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (H1) housing units data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
H3 Occupancy Status BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (H3) Occupancy Status data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
H4 Tenure BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (H4) tenure data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P12 Sex by Age_BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (P12) sex by age data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P18 Household Type BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (P18) household type data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P1 Total Population BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (P1) total population data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 805-891-6400
P35 Families BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (P35) family data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P3 Race BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (P3) race data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P4 Hispanic Latino Origin_BG The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Block Groups (BGs) are defined before tabulation block delineation and numbering, but are clusters of blocks within the same census tract that have the same first digit of their 4-digit census block number from the same decennial census. For example, Census 2000 tabulation blocks 3001, 3002, 3003,.., 3999 within Census 2000 tract 1210.02 are also within BG 3 within that census tract. Census 2000 BGs generally contained between 600 and 3,000 people, with an optimum size of 1,500 people. Most BGs were delineated by local participants in the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated BGs only where the PSAP participant declined to delineate BGs or where the Census Bureau could not identify any local PSAP participant. A BG usually covers a contiguous area. Each census tract contains at least one BG, and BGs are uniquely numbered within census tract. Within the standard census geographic hierarchy, BGs never cross county or census tract boundaries, but may cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. BGs have a valid code range of 0 through 9. BGs coded 0 were intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. For Census 2000, rather than extending a census tract boundary into the Great Lakes or out to the U.S. nautical three-mile limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore. The Census Bureau assigned a default census tract number of 0 and BG of 0 to these offshore, water-only areas not included in regularly numbered census tract areas. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block group level, that has been joined with deccenial Census 2010 (P4) Hispanic or Latino Origin for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
Census 2010 Demography Blocks H1 Housing Units B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (H1) housing units data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
H3 Occupancy Status B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (H3) Occupancy Status data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
H4 Tenure B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (H4) tenure data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P12 Sex by Age B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (P12) sex by age data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P18 Household Type B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (P18) household type data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P1 Total Population B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (P1) total population data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P35 Families B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (P35) family data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P3 Race B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (P3) race data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P4 Hispanic or Latino Origin B The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the block level, that has been joined with deccenial Census 2010 (P4) Hispanic or Latino Origin for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
Census 2010 Demography Tracts H1 Housing Units T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (H1) housing units data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
H3 Occupancy Status T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (H3) Occupancy Status data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
H4 Tenure T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (H4) tenure data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P12 Sex by Age T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (P12) sex by age data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P18 Household Type T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (P18) household type data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P1 Total Population T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (P1) total population data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P35 Families T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (P35) family data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P3 Race T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (P3) race data for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
P4 Hispanic Latino Origin T The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. This is a 2010 TIGER/Line shapefile of Leon County, Fl at the tract level, that has been joined with deccenial Census 2010 (P4) Hispanic or Latino Origin for Leon County, Fl.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
Census 2010 Census Block Groups 2010 The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.
For more information please contact: U.S. Department of Commerce, U.S. Census Bureau, Geography Division, Geographic Products Branch at: 301-763-1128
Census Blocks 2010 The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.
For more information please contact: U.S. Department of Commerce, U.S. Census Bureau, Geography Division, Geographic Products Branch at: 301-763-1128
Census Tracts 2010 The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line File is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.
For more information please contact: U.S. Department of Commerce, U.S. Census Bureau, Geography Division, Geographic Products Branch at: 301-763-1128
DEM 96 Masspoints 2ft 1996 2 ft Mass points Provides mass point elevation data collected within the Phase 1 Area of the 1996 Landbase Update Project. This data set is one of the principal elements of the digital terrain model (DTM).
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
DEM 96 Masspoints 4ft 1996 4 ft Mass points Provides mass point elevation data collected within the Phase 2 Area of the 1996 Landbase Update Project. This data set is one of the principal elements of the digital terrain model (DTM).
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Depts COT Realty COT_fs_properties Provides parcel and attribute data for fee simple properties owned by the City of Tallahassee located within Leon County.
For more information please contact: City of Tallahassee Real Estate Division at: 850-891-8711
Depts LCPW Emergency EOC.CrewFeeding Locations where LCPW work crews can be fed in event of emergency.
For more information please contact: Leon County Public Works at: 850-606-1500
EOC.debrirss Locations where emergency post-event debris can be stored.
For more information please contact: Leon County Public Works at: 850-606-1500
EOC.Staging_Areas Areas covered by the various work crews stationed in these areas in event of emergency.
For more information please contact: Leon County Public Works at: 850-606-1500
EOC.Staging_Points Locations where LCPW work crews and equipment can be staged in event of emergency.
For more information please contact: Leon County Public Works at: 850-606-1500
depts lcpw engineer serviceareas City of Tallahassee Water Utility Franchise Areas City of Tallahassee Water Utility Franchise Areas as granted by the Leon County Board of County Commissioners. The polygons indicate where the City of Tallahassee has been authorized to provide water service; service is not necessarily physically in place.
For more information please contact: Leon County Public Works at: 850-606-1500
COT Water and Sewer Utility Franchise Areas City of Tallahassee Water and Sewer Utility Franchise Areas as granted by the Leon County Board of County Commissioners. The polygons indicate where the City of Tallahassee has been authorized to provide water and sewer service; service is not necessarily physically in place. Features in this data set will overlap the COT Water Utility Franchise Areas features in some areas; that is an indication that the COT was first granted a Water Utility Franchise area and then later was granted both Water and Sewer Franchise in the overlapping area.
For more information please contact: Leon County Public Works at: 850-606-1500
Non-exclusive Areas Non-exclusive Franchise Areas as granted by the Leon County Board of County Commissioners. The polygons indicate areas where the City of Tallahassee and/or Talquin Electric are authorized to provide service; service is not necessarily physically in place.
For more information please contact: Leon County Public Works at: 850-606-1500
Leon County Private Utility System Franchise Areas Data set represents franchise areas granted to private utilities by the Leon County Board of County Commissioners. Typically these are small water or sewer systems that serve a single subdivision or neighborhood. Source data does not indicate whether a specific system provides water, sewer or both. Users with questions about a specific Private Utility System Franchise Area should contact Leon County Public Works.
For more information please contact: Leon County Public Works at: 850-606-1500
Subdivisions Excluded from Sewer Franchise Territory Subdivisions Excluded from the Sewer Franchise Agreement by the Leon County Board of County Commissioners on 2/27/2002. Some exempted subdivisions have subsequently voluntarily requested sewer service from one of the local utilities; thus this layer thus does not necessarily indicate the absence of sewerage.
For more information please contact: Leon County Public Works at: 850-606-1500
Leon County Sewer Target Areas Areas identified by Leon County Public Works staff to be considered for sewer improvements. This data set is for general planning and discussion purposes only and does not imply improvement projects are imminent for any specific areas.
For more information please contact: Leon County Public Works at: 850-606-1500
TEC Water Utility Franchise Areas Talquin Electric Cooperative (TEC) Water Utility Franchise Areas as granted by the Leon County Board of County Commissioners. The polygons indicate where TEC has been authorized to provide water service; service is not necessarily physically in place.
For more information please contact: Leon County Public Works at: 850-606-1500
Talquin Water Utility Franchise & COT Sewer Utility Franchise Areas Identifies areas of mixed utility service, where the Leon County Board of County Commissioners has granted a Water Utility Franchise Area to Talquin Electric Cooperative (TEC) and a Sewer Utility Franchise Area to the City of Tallahassee (COT) .
For more information please contact: Leon County Public Works at: 850-606-1500
TEC Water and Sewer Utility Franchise Areas Talquin Electric Cooperative (TEC) Water and Sewer Utility Franchise Areas as granted by the Leon County Board of County Commissioners. The polygons indicate where TEC has been authorized to provide water and sewer service; service is not necessarily physically in place.
For more information please contact: Leon County Public Works at: 850-606-1500
Depts LCPW Floodprone Properties Acquisition Program The Leon County Board of County Commissioners approved a prioritized list of flood prone properties and directed Leon County Public Works to implement a program to purchase these properties to alleviate flooding-related issues. This a long-term acquisition project; purchases are made each year from available funding. As of Summer 2007 no further funding was available.
For more information please contact: Leon County Public Works at: 850-606-1500
Depts LCSO Patrol Zones Provides Boundary Information for the Leon County Sheriff Office
For more information please contact: Tallahassee-Leon County GIS at: 850-922-3300
Sub Zones Provides Boundary Information for the Leon County Sheriff Office
For more information please contact: Tallahassee-Leon County GIS at: 850-922-3300
Depts Winload ASCE 7-98 Basic Wind Speed Surface Provides contour map of ASCE Basic Windspeed Map.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Envirn bfe Base Flood Elevations: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system.The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000. The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally if there are any riverine AE zones, BFE lines are required. The S_BFE table contains information about the BFEs within a study area. A spatial file with locational information also corresponds with this data table. BFE lines indicate the rounded whole-foot water surface elevation of the 1-percent-annual-chance flood. The spatial elements representing BFE features are lines extending from Special Flood Hazard Area (SFHA) boundary to SFHA boundary. The BFE lines will have no visible gaps or overshoots between the SFHA boundary and the end of the BFE line at the publication scale of the DFIRM. However, the ends of the BFE lines are not necessarily snapped precisely to the SFHA boundary. Each BFE is represented by a single line. While BFE lines are depicted as wavy lines on the hardcopy FIRM, they should be primarily straight lines in the spatial data, although they may bend consistent with procedures described in Volume 1 of these Guidelines. This is a Standard DFIRM Database table.
For more information please contact: Federal Emergency Management Agency at: 1-800-358-9616
canopyb Provides locations of designated canopy road zones (cpz) (100 feet from the center of a designated canopy road) in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
canopyrd_trees The dataset is an inventory of trees along canopy roads, specifically those trees within 20 feet of the road edge and greater than 17 inches "Diameter at Breast Height" (DBH). DBH which has been standardized at 54" above the ground.
For more information please contact: Leon County Public Works at: 850-606-1500
Fema Cross Sections 2005 (FIS1) This table is required for any Digital Flood Insurance Rate Map database where cross sections are shown on the Flood Insurance Rate Map (FIRM). Normally any FIRM that has associated flood profiles has cross sections. The S_XS table contains information about cross section lines. A spatial file with locational information also corresponds with this data table. These lines represent the locations of channel surveys performed for input into the hydraulic model used to calculate flood elevations. These locations are also shown on the Flood Profiles in the Flood Insurance Study (FIS) report and can be used to cross reference the Flood Profiles to the planimetric depiction of the flood hazards. All cross sections for which a spatial location is available should be included
For more information please contact: Federal Emergency Management Agency at: 1-800-358-9616
fema The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system.The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.
For more information please contact: Federal Emergency Management Agency at: 1-800-358-9616
1997 Digital Flood Insurance Map (DFIRM) Map Panel Index Provide map panel index for digital information for Leon County of thematic information found on Flood Insurance Rate Maps (FIRMs) published by the Federal Emergency Management Agency (FEMA).
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
firmpanels The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system.The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000. This table is required for all preliminary or final DFIRM databases. The S_FIRM_Pan table contains information about the Flood Insurance Rate Map (FIRM) panel area. A spatial file with locational information also corresponds with this data table. The spatial entities representing FIRM panels are polygons. The polygon for the FIRM panel corresponds to the panel neatlines. As a result, the panels are generally rectangular. In situations where a portion of a panel lies outside of the jurisdiction being mapped, the user must refer to the S_POL_AR table to determine the portion of the panel area where the DFIRM database shows the effective flood hazard data for the mapped jurisdiction. This is a Standard DFIRM Database table.
For more information please contact: Federal Emergency Management Agency at: 1-800-358-9616
1997 DFIRM 100 and 500 year Flood Hazard Areas Provide digital information for information found on FEMA Flood Insurance Rate Maps for 100 and 500 year Flood Hazard Areas (eg. Zone A, AE, and X).
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
STORET surface water stations in Leon County and vicinity Locations of STORET sampling stations in and near Leon County, FL. STORET(an acronym for STORage and RETrieval database) is the database for the storage of biological, chemical, and physical data for ground and surface waters. While the United States Environmental Protection Agency designed STORET as a national water quality database, Florida's STORET database design is dictated by a state regulation called the "Impaired Waters Rule" (Chapter 62-303, Florida Administrative Code). Further information on Florida STORET is available at: http://www.dep.state.fl.us/water/storet/.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-1500
NWFWMD Landuse Landcover This dataset was derived from the Florida DEP's NWFWMD 2009-2010 Land Use dataset. Unlike the source dataset, this dataset only covers Leon County plus a 500 foot buffer. This dataset was also re-projected from FEDP_Albers_HARN to NAD_1983_HARN_StatePlane_Florida_North_FIPS_0903_Feet. The source dataset was created by the Florida Department of Environmental Protection's Bureau of Watershed Restoration and is an inventory of Land use - Land Cover classified in the State of Florida's Northwest Florida Water Management District and based on 2009 and/or 2010 Florida Ortho Quarter Quad Aerial Imagery True color photography. Classifications are provided for level 1, 2, 3 and a few level 4 (indicated in Land use and Secondary Code fields) land uses. This is not the land use layer from the Tallahassee-Leon County Planning Department. It is not based on attribute data linked to parcels, but rather polygon data compiled from 1-ft resolution orthoimagery using photointerpretation techniques to delineate the actual footprint of particular landcover classes. The classification is based on the Florida Land Use, Cover and Forms Classification System published by the Florida Department of Transportation. More information can be found at: http://www.dot.state.fl.us/surveyingandmapping/Manuals/fluccmanual.pdf Entity and attribute overview: The adopted classification scheme has resulted from the following process: 1. Potential classification types originally taken from Florida Department of Transportations "Florida Land use, cover and forms classification system" 2. Conformity with SJRWMD's classification system was sought whenever possible out of an interest in creating a data layer that would result in a product that was seamless in terms of its geometry and attribution with this contingent area. 3. Bureau of Watershed Restoration, Watershed Assessment Section (WAS) Managers reviewed a preliminary list for the purpose of identifying classification types that contributed to sources of pollution and those that allowed them to identify natural conditions that may have an effect on water quality impairment. This led to the removal of some classification types from the preliminary list to form a WAS wants list. 4. Photo interpreters reviewed the available photography for the purpose of determining which of the WAS wants list could and could not be classified. For example, the resolution of the imagery allowed a photointerpreter to confidently assign the level 3 class code of 2140: Row Crops to a polygon but not of any of the Level 4 codes (see next item). 5. The FLUCC's system is hierarchical; it includes four levels that build in terms of specificity: A Level 1 classification is the most general it is a four digit code in which the first integer in the code is assigned one of eight numbers; 1000 = Urban and Built up class, 2000 = Agricultural, 3000 = Rangeland, 4000 = Upland Forests, 5000 = Water, 6000 = Wetlands, 7000 = Barren Land and 8000 = Transportation, Communications, Utilities. The second integer (and each successive integer) provides a subclassification of a higher specificity. For example 2100 (Level II) Class is Crop and pasture land a subtype of the 2000 Agricultural class, 2150 (Level III) : Field Crops is a specific subtype of the 2100 Crop and pasture land subtype. Further, 2153 (Level iV) is a specific subtype of the 2150 class. Very few level 4 classifications have been chosen. This is so because discernment of the keys to classification for these classes typically require imagery of a higher resolution than our source imagery. The Level 4 designation is indicated in either the Land Use Code or Secondary Code Fields of the attribute table. 6. A few classification types were added to accommodate needs that were specific to the Water Management districts.
For more information please contact: Tallahassee - Leon County GIS at: (850) 606-5587
soil This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties.
For more information please contact: U.S. Department of Agriculture, Natural Resources Conservation Service at: 352.338.9535
Watershed and Drainage Basin Coverage Delineate areas in Leon County for which Flood Insurance is required for structures.
For more information please contact: City of Tallahassee, Stormwater Management Division at: 850-891-6857
ESA Altered Watercourses Provides locations of Altered Watercourses in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Altered Wetlands Provides locations of Altered Wetlands in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
canopyb Provides locations of designated canopy road zones (cpz) (100 feet from the center of a designated canopy road) in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Canopy Roads Provides locations of designated canopy roads in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
canopyrd_trees The dataset is an inventory of trees along canopy roads, specifically those trees within 20 feet of the road edge and greater than 17 inches "Diameter at Breast Height" (DBH). DBH which has been standardized at 54" above the ground.
For more information please contact: Leon County Public Works at: 850-606-1500
db_basins This layer delineates the boundaries of drainage basins in Leon County, Florida. Basins are the largest unit of drainage and typically drain into a major lake or river in cases where there is a significant drainage network of streams present. In areas where internal drainage is the dominant mechanism of water movement basin boundaries represent limits beyond which flow does not typically occur during normal hydrologic conditions.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
db_catch This layer delineates the boundaries of drainage catchments in Leon County, Florida. Catchments are the smallest unit of drainage delineated in the ESA datasets.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
db_wshed This layer delineates the boundaries of drainage watersheds in Leon County, Florida. Watersheds are the intermediate level unit of drainage delineated in the ESA datasets, smaller than basins and larger than catchments.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
DevFlood This dataset is part of a regularly scheduled update of planimetric, hydrographic, and topographic features. The dataset was created from source imagery acquired by a Leica ADS40 multispectral scanner and LAS data acquired by a Leica ALS50 Phase I LiDAR sensor from January 31, 2009 through February 6, 2009.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
1997 Digital Flood Insurance Map (DFIRM) Data Provide digital information for Leon County of thematic information found on Flood Insurance Rate Maps (FIRMs) published by the Federal Emergency Management Agency (FEMA).
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
1997 Digital Flood Insurance Map (DFIRM) Data (polyline) Provide digital information for Leon County of thematic information found on Flood Insurance Rate Maps (FIRMs) published by the Federal Emergency Management Agency (FEMA).
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
forest Provides locations of upland forest communities that have native or high quality characteristics.
For more information please contact: Leon County Department of Growth and Environmental Management at: 850-606-1376
grade Severe and Significant grades used for environmental regulation of development by the City and County Growth Management departments.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
grade20_88
For more information please contact: at:
Observed Flood Elevation Points Provides observed flood elevation points.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
karst Karst features derived from 1996 DEM.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Waterbodies at 89 feet Elevation (Lake Jackson) Provides locations of Waterbodies at 89 feet elevation as referenced in the Land Development Regulations (Lake Jackson).
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Physiographic Provinces Provides locations of Physiographic Provinces for Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Regulated Flood Flood regions with observed or calculated elevation
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
sdz Provides boundary locations of Special Development Zones in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-1320
wbody Provides locations of Waterbodies in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
wcourse This data is the waercourse component of the Tallahassee-leon County Environmentally Sensitive Areas data.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
wetland Provides locations of Wetlands in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Facilities Parks allparks Location of city, county and state parks and wildlife areas in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-1500
allparks_pt Location of city, county and state parks and wildlife areas in Leon County.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-1500
alltrails Recreational trails in Leon County. This data set was jointly developed by City of Tallahassee Parks Department and Leon County Public Works Department.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-1529
park_amenities Amenities and facilities within parks and recreation areas in Tallahassee/Leon County. This data set was jointly developed by City of Tallahassee Parks Department and Leon County Public Works Department.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-1500 or 850-891-3919
Facilities School Zones Leon County Elementary School Zones (polylines) Delimits the area of Leon County Elementary School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
es_zones Delimits the area of Leon County Elementary School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
Leon County High School Zones (polylines) Delimits the area of Leon County High School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
hs_zones Delimits the area of Leon County High School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
Leon County Middle School Zones (polylines) Delimits the area of Leon County Middle School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
ms_zones Delimits the area of Leon County Middle School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
Leon County Middle School Zones (polylines) Delimits the area of Leon County Middle School Zones.
For more information please contact: Leon County School Board, Department of Planning and Policy Development at: 850-487-7151
Facilities Sidewalks curbramps Provides locations for sidewalk ADA facilities within Leon County
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-8600
impediments Provides locations for sidewalk impediments within Leon County
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-8600
obstructions Provides locations for sidewalk obstructions within Leon County
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-8600
sidewalks Provides locations for linear sidewalk segments within Leon County
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-8600
Facilities Towerdir Tower Structure .dbf attributes within Leon County Provides Tabular data for Antenna Structures within Leon County
For more information please contact: Tallahassee-Leon County GIS at: 850-488-2818
Tower Structures within Leon County Provides point locations for Tower Structures within Leon County
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Facilities airport Provides locations of paved runway and other airport facilities at Tallahassee's Regional Airport.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
boatramp Provides locations of public boat ramps and landings in Leon County. These landings are managed by Leon County, various State of Florida agencies or other adjacent counties.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5580
Common Places This dataset contains spatial locations of businesses and non-addressed locations within the City of Tallahassee & Leon County.
For more information please contact: City of Tallahassee ISS/GIS at: 850-891-4941
CommunityCenters The purpose is to provide locations, names and contact information for community centers in City of Tallahassee and Leon County.
For more information please contact: TLCGIS at: 850-606-5504
firestat Provides locations of fire stations in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
firezone Provides boundaries of fire station response zones in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
fsufamu Provides parcels of Florida State University (FSU), Florida A&M University (FAMU), and Tallahassee Community College (TCC).
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
fsu_famu_tcc Provides parcels of Florida State University (FSU), Florida A&M University (FAMU), and Tallahassee Community College (TCC).
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Historical_Railroad
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Selected Landmarks (Point Features) Provides point locations of selected landmarks in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Selected Area Landmarks Provides locations of selected areal features and landmarks in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Leon County Facilities Provides locations of certain facilities managed by the Leon County Board of County Commissioners.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
LeonLibraries Provides locations of Public Libraries, Library Branches and Book Mobile stops.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5580
Police Stations Provides locations of Law Enforcement Facilities (FSU, TPD, FHP Stations, Sheriff's Office) in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Rail Roads Provides locations of rail road lines and sidings in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Red Cross Shelters Provides location and address for Red Cross Shelters in Tallahassee. What Type of Shelter and whether the shelter is open or closed (Status) is also provided.
For more information please contact: Tallahassee - Leon County GIS at: 850-606-5504
Regional Railroads Provides locations of rail road lines and sidings in Leon & surrounding counties.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
schland Provides RegionPoly processing on Parcel coverage at \\edb\edb\property
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5500
schools Provides locations of Public and certain Private Schools in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5580
Major Sports Stadiums Provides locations of Major Sports Stadiums.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
St Marks Bike Trail Provides general route and location of St Marks Bike Trail.
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8600
Volunteer Fire Department Zones Provides locations of Volunteer Fire Department Zones (VFDs) in Leon County.
For more information please contact: City of Tallahassee Electric Police Department at: 850-488-8003
Flooding Local Flooding Problem Areas Local Flooding Problem Areas
For more information please contact: City of Tallahassee Stormwater Management Division at: 850-891-6857
Flood Data of T.S. Allison Provides point data where flooding was witnessed by Red Cross for Tropical Storm Allison.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Flood Data of T.S. Barry Provides point data where flooding was witnessed by Red Cross for Tropical Storm Barry.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Imagery edbdop dop2012 This dataset is part of a regularly scheduled update of LiDAR and digital orthotography products. The dataset was created from source imagery acquired by a Trimble TAC80 natural color digital camera and LAS data acquired by a Leica ALS50 Phase 2+ LiDAR sensor from January 29, 2012 to February 12, 2012.
For more information please contact: TLCGIS at: (850) 606-5587
dop2015 This dataset is part of a regularly scheduled update of LiDAR and digital orthotography products. The dataset was created from source imagery acquired by a Trimble TAC80 natural color digital camera and LAS data acquired by a Optech ALTM HA500 (Pegasus) LIDAR sensor from January 18, 2015 to February 5, 2015.
For more information please contact: TLCGIS at: (850) 606-5587
Imagery Historical Leon County Historical Aerial Imagery 1941 This project shows U.S.D.A. aerial imagery of Leon County, FL. The imagery was taken in May, 1941. The images were obtained from the University of Florida Digital Collections: George A. Smathers Libraries. http://ufdc.ufl.edu/aerials/all The images were cropped and processed in graphics software and georeferenced in ArcGIS.
For more information please contact: at:
Juris County Commission Districts (Polylines) Provides County Commission District Boundaries of the Leon County Board of County Commissioners.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
comdist Provides County Commission District Boundaries of the Leon County Board of County Commissioners.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Voter Polling Places in Leon County Coverage of the current polling locations in Leon County. This dataset only lists the polling location one time for every facility and shows combinations.
For more information please contact: Leon County SOE at: 850-606-8683
Voter Polling Places in Leon County (Unique) Coverage of the current polling locations in Leon County. This dataset differs from the dataset "polls" in that this dataset only lists the polling location one time for every facility and shows combinations.
For more information please contact: Leon County SOE at: 850-488-1350
Leon County Voter Precincts (polylines) This map file contains the current Leon County precincts.
For more information please contact: Leon County SOE at: 850-488-1350
precincts This map file contains the current Leon County precincts.
For more information please contact: Leon County SOE at: (850) 606-8683
schlbrd Provides locations of Leon County School Board Districts.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Landuse bradfordvillestudyarea Provides boundary of Bradfordville Study Area
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Bradfordville Study Area, Original Area. Establish the boundary for the original Bradfordville Study Area.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
central_city Provides boundary of Central City Strategic Area as identified in the Leon County Comprehensive Plan
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8600
downtown_cra To provide geographic coverage of the Downtown District Community Redevelopment Area boundary
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
downtown_imp_auth The Tallahassee Downtown Improvement Authority (TDIA) was created by an act of the Florida Legislature in 1971. This act created a special assessment district to assist in the promotion of downtown for redevelopment, a place to do business and for hospitality. The TDIA is governed by an eleven-member board of directors that are appointed by the Mayor of the City of Tallahassee. Members of the board have rotating terms and can be reappointed. Board members must be property owners and taxpayers in the TDIA downtown district. The activities of the TDIA include: •Development planning •Public improvements •Special events •Promotions •Beautification
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
Downtown Overlay The Downtown Overlay is a single polygon covering an area in the urban center of Tallahassee
For more information please contact: City of Tallahassee Planning Department at: 850-891-6449
downtown_overlay The Downtown Overlay is a single polygon covering an area in the urban center of Tallahassee
For more information please contact: City of Tallahassee Planning Department at: 850-891-6449
dris This dataset shows the Developments of Regional Impact polygons.
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
Enterprise_Zone To provide geographic coverage of the Tallahassee-Leon County Enterprise Zone boundary
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
Existing Land Use The existing land use is based on research of the property appraisers file, permits, previous existing land use records and other sources. This is done each year and an effort is made to reflect existing land use as of October 31st of that year. Beginning in 2006, that date is reflected in the last field of the file. (effective-dt) Errors or descrepancies should be reported to the Planning Department.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-6400
Frenchtown/Southside Community Redevelopment Area To provide geographic coverage of the Frenchtown/Southside Community Redevelopment Area boundary
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
func_class To provide geographic coverage of the Roadway functional Classifcation as defined in the comprehensive plan
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
futlu The Future Land Use file is a map of the future land use designations as described in the comprehensive plan for Leon County and the City of Tallahassee. It was created using GIS layers and the comprehensive plan as source data as well as extensive proofing over several years.
For more information please contact: Tallahassee-Leon County Planning Department at: 850-891-8600
Historic Preservation Overlay Identifies property in the Historic Preservation Overlay (HPO) in Tallahassee and Leon County Florida. "HPO is used to impose special development restrictions on identified areas to protect the historic resources of the community."(Tallahassee Code of Ordinances, Article X, Sec. 10.4.D.)
For more information please contact: Tallahassee - Leon County Planning Department at: (850) 891-8600
hubzone To provide geographic coverage of the Tallahassee HUBZone boundary
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
lk_bradford_corridor This is a single polygon designating the lake bradford commercial corridor area in which there are specific allowable land uses.
For more information please contact: Tallahassee-Leon County GIS at: 850-891-6449
Zoning Map Page Index Provides index of map pages used in the creation of the Official Zoning Atlas of Tallahassee and Leon County, Florida
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8600
MultiModalTransDist MMTD (Multi-Modal Transportation District) is a single polygon covering an area central to Tallahasse.
For more information please contact: City of Tallahassee Planning Department at: 850-891-6440
providence_overlay This is a single polygon designating the Providence Neighborhood Overlay area in which there are specific allowable land uses.
For more information please contact: Tallahassee-Leon County GIS at: 850-891-6449
southernstrategy This is the county version of an area targeted for study and improvements. There is also a city version which differs only slightly in boundary placement.
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8600
SpringsProtectionZone The Springs Protection zone is a single polygon covering much of the southern portion of Leon County. Line placement is set to select parcels by "intersects" selection. The purpose is to protect groundwater quality.
For more information please contact: City of Tallahassee Planning Department at: 850-891-6449
Downtown District Community Redevelopment Area To provide geographic coverage of the Downtown District Community Redevelopment Area boundary
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
taz Provides locations of Traffic Analysis Zones 2000
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8600
univ_pcls_mstrpln This is a set of parcels selected from the parcel file. They are owned by the State or University and lie within the University Masterplans of FSU and FAMU
For more information please contact: Tallahassee-Leon County GIS at: 850-891-6449
urban_jobs_tax_credit_areas To provide geographic coverage of the Urban Jobs Tax Credit Program Area boundary
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8685
Zoning Provides zoning boundaries used in the creation of the Official Zoning Atlas of Tallahassee and Leon County, Florida.
For more information please contact: Tallahassee-Leon County GIS at: 850-891-8600
Property Leon County Easements Provides general locations of easements in Leon County.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
GISNAL REQUIRED: A brief narrative summary of the data set.
For more information please contact: at:
Leon County Historical Lots Provides general locations of Historical Lots in Leon County.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
lot Provides general locations of lots in Leon County.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
parcel Provides general locations of parcels in Leon County.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
PARNAL Provides RegionPoly processing on Parcel coverage at \\edb\edb\property
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Leon County Parcel Point Locations Provides point locations of parcels in Leon County
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Selected Plantations Provides a digital map version and update of the map "Leon County Hunting Preserves & Selected Plantations"
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Railroad Right Of Way Provides approximate boundaries of railroad right of way
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Public Lands Survey System (PLSS) Sections (polylines) Provides general locations of PLSS Township and Section boundaries in Leon County.
For more information please contact: Tallahassee-Leon County GIS at: 850-488-6102
Public Lands Survey System (PLSS) Sections Provides general locations of PLSS Township and Section boundaries in Leon County.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
subdiv Provides general locations of subdivisions in Leon County.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Tiebar Provides linework to display single ownership of non-contiguous polygons.
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Public Land Survey Sections (PLSS) Townships (polylines) Provides general locations of PLSS Township and Range borders in Leon County
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Public Land Survey Sections (PLSS) Townships Provides general locations of PLSS Township and Range borders in Leon County
For more information please contact: Leon County Property Appraiser at: 850-488-6102
Roads Leon lcstseg Provides centerline of roadway, street names, and address ranges for address matching and routing applications.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
majorst Provides major highways and streets in Leon County for general location map and other small scale index map applications
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
TrafficConcurrency Road segment layer with traffic concurrency attributes maintained by city and county transportation planning staff
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Roads Wakulla COT Wakulla County Major Streets This data (Wakulla Co. Major Streets) was acquired from Wakulla County Planning Dept. in March 2002 to be used only as reference information only. This dataset has only major street centerlines.
For more information please contact: City of Tallahassee ISS at: 850-891-8495
COT Wakulla County Minor Streets This data (Wakulla Co. Minor Streets) was acquired from Wakulla County Planning Dept. in March 2002 to be used only as reference information only. This dataset shows both major & minor street centerlines.
For more information please contact: City of Tallahassee ISS at: 850-891-8495
COT Wakulla County Trails This data (Wakulla Co. Trails) was acquired from Wakulla County Planning Dept. in March 2002 to be used only as reference information only. This dataset has only trail centerlines.
For more information please contact: City of Tallahassee ISS at: 850-891-8495
Special Projects Sales Tax Projects Locations of joint City, County and EECC/BP2000 Sales Tax funded projects.
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
USGS24k USGS 24k Quadrangle Index Map Provides boundaries, names, and FDEP quad index numbers for USGS 24k Quadrangles Maps for Leon County
For more information please contact: Tallahassee-Leon County GIS at: 850-606-5504
Utilities Electric ELE.coteservicearea City of Tallahassee Electric Services Boundary Line feature
For more information please contact: City of Tallahassee Electric Power Engineering at: 850-891-5008
cotserviceareapoly City of Tallahassee Electric Services Boundary Line feature
For more information please contact: City of Tallahassee Electric Power Engineering at: 850-891-5008
ELE.coteserviceareapoly City of Tallahassee Electric Services Boundary Line feature
For more information please contact: City of Tallahassee Electric Power Engineering at: 850-891-5008
Utilities Traffic COT Traffic Lights Depicts point locations of traffic lights in city limits.
For more information please contact: Tallahassee-Traffic Engineering at: 850-891-8509
COT Traffic Cameras Depicts point locations of traffic cameras in city limits.
For more information please contact: Tallahassee-Traffic Engineering at: 850-891-8509
Utilities Water Sewer Talquin Electric Co-op Water Hydrants Talquin Electric Co-op Water Hydrants
For more information please contact: City of Tallahassee Water Utilities at: 850-891-5696